AU3152 -
MP3 / WMA Player with USB 2.0 Flash Disk Controller
The AU3152 is an SOC solution designed to address the needs of MP3 / WMA Digital Audio Player using NAND flash.
Featuring USB 2.0 Engine, flash disk, MP3 / WMA Decode Engine, 16-bit Audio DAC, LED, and GPIO inside. The built-in regulator and battery monitor make AU3152 an ideal solution for building low cost Digital Audio Players. In addition to the low cost characteristics, low power consumption and high performance are two other innate features of AU3152.
Crafted with smart ingenuity of system architecture and firmware design, the product using AU3152 could also be treated as a USB 2.0 flash disk with good flash read/write performance. As a flash disk, it supports SLC (Single-Level Cell) and MLC (Multi-Level Cell) NAND and AG-AND with multiple dies data flashes. Its high-speed read and write access performance enable users to transfer data and music files efficiently. ISP (In-System Programming) technologies allow manufacturers to build MP3 products supporting wide range of flash and developing promotional units with auto-run function.
The built-in MP3 / WMA decoder inside AU3152 is a cost-efficient solution for playing back digital audio. Altogether, using AU3152 with minimally required external components on board entitles the end product to have strong competitiveness in the dimensions of cost, performance and power consumption. With these outstanding characteristics, the products using AU3152 could easily exhibit strong competing power to the rival offerings of its same kind. Main Features:
Embedded MP3/WMA Decoder:
- Support both ISO11172-3, ISO13818-3 layer III, WMA V4, V7, V8, V9, V10 audio decoding.
- Support 8~48 KHz sampling frequency.
- Support single channel, dual channel, and stereo format.
- 20 steps digital volume control.
- 10-band equalizer support Normal, Live, Party, Classic, Pop, and Rock sound effects.
- Support A-B section and repeat for language and song learning.
USB 2.0 Flash Disk Functions:
- 8bit / 12bit ECC (8bit / 512Bytes and 12bit / 512Bytes BCH ECC engines).
- Support 4k / PageSLC and MLC dual channel with high performance.
- Integrates hardware DMA engine to tune up the operation performance.
- Improve read performance to 30MB / sec.
- Complies with the standards defined in USB V2.0, USB Device Class Definition for Mass Storage and Bulk - Transport V1.0.
- Works with default driver under the environments of Windows ME, Windows 2000, Windows XP, Mac 9.2, Mac OS X. Using Alcor Micro’s vendor driver for the environment under Windows 98SE.
- Concurrent bus operation using multiple FIFO for better performance.
- Supports bad block management.
- Supports dynamic serial number modification via mass production software.
- Supports Auto Run function.
Firmware Upgrade:
- 16K firmware upgrade for flash support and buttons definitions.
Integrated Audio DAC:
- Save external components.
- SNR up to 80db.
- Dynamic power control for audio DAC.
Integrated Power Management:
- Save external components.
- On-chip 3.3V to 1.8V regulator.
- Embedded 5V to 3.3V regulator.
- Low power 1.8V logic core operation voltage.
- 3.3V operation I/O with 5V tolerance range.
- Integrated battery monitor for 1.5V dry cell and 3.7V Li-ion rechargeable batteries.
Buttons and Menu Functionality:
- Play / Pause: Play and pause music.
- Hold / Normal: Hold the key sense (default for Normal).
- AD Key.
- Volume Up / Down: Increase and decrease volume.
- Previous / Next: Jump to last / next song and play.
- Normal / Random: Cyclic selection for Sequential / Random playing sequence.
- A-B Section: A-B section setting and repeating.
Power:
- USB bus powered for USB reader mode.
- For single AAA dry battery / Nicd / NiMH operating for MP3 / WMA modes.
- Automatically system shut down for system idle, low battery or paused greater than 3 minutes.
Firmware Upgrade by ISP (In System Programming):
The following items can be customized by manufacturers to develop unique products:
- Programmable support of wide range of SLC and MLC flash.
- Flash module support.
- Auto-run.
- Programmable support of button functions when press in pulse and hold.
|
| Evaluation
Kit Information |
|
AU3152 evaluation kit is designed for customers to test and check the features on demonstration PCB, and also available for future development and design reference purpose. |
- Sample Chips x 10
- Print Datasheet x 1
- Main Sample Print Circuit Board x 1
- Software CD for Development Usage x 1
|
- Price:
USD250 / each (per engineering evaluaction kit)
- Payment Terms:
Bank Wire Transfer (T/T) in Advance or Credit Card (Contact Alcor sales for this)
- Shipping is FOB Taiwan, preferred shipping method is to bill customer FedEx or UPS account.
- Bank information:
Alcor Micro, Corp.
Bank Name: ChinaTrust Commercial Bank, Tun Nan Branch
Bank Add: No.68, Sec. 2, TunHua S. RD. Taipei, Taiwan, R.O.C.
Bank Tel: +886-2-23253616
Swift Code: CTCBTWTP
Account: 163-131-009545
|
|
 |
|